BBSDB - BLACK FLASH FLASHING CEMENT
- MSDS: BBSDB
- Manufacturer: J C WHITLAM MANUFACTURING CO
- Product Name: BLACK FLASH FLASHING CEMENT
- National Stock Number: 8040-00F005279
Product Identification
Product ID:BLACK FLASH FLASHING CEMENT
MSDS Date:01/01/1987
FSC:8040
NIIN:00F005279
MSDS Number: BBSDB
Responsible Party
Emergency Phone: (216) 334-2524
Cage: FO044
Contractor
Telephone: 216-334-2524
Cage: FO044
Ingredients
NAPHTHA (PETROLEUM SPIRITS OR BENZIN)
CAS: 8030-30-6
RTECS: SE7555000
Fraction By Weight: 21%
OSHA PEL 100 PPM
Hazards
Effects of Overexposure:INHALATION OF HIGH VAPOR CONCENTRATION CAN
CAUSE HEADACHE/DIZZINESS/EYES/NOSE & THROAT IRRITATION
First Aid
First Aid:INHALATION: REMOVE PERSON FROM CONTAMINATED AREA. GIVE
ARTIFICIAL RESPIRATION IF BREATHING IS INTERRUPTED. SKIN CONTACT:
WASH WITH SOAP & WATER. EYE CONTACT: WASH WITH WATER FOR 15
MINUTES. CALL PHYSI CIAN.
Fire Fighting
Flash Point:105F CC
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:DON'T DIRECT A SOLID STREAM OF WATER INTO HOT
ASPHALT.
Unusual Fire/Explosion Hazard:WATER SPRAY OR FOAM MAY BE INEFFECTIVE
BECAUSE OF FROTHING; APPLY CAUTIOUSLY.
Accidental Release
Spill Release Procedures:REMOVE SOURCES OF HEAT, FLAME, SPARKS. CONFINE
SPILL. EVACUATE AFFECTED AREA. NOTIFYUTHORITIES. RECOVER FREE
LIQUID. ADD ABSORBENT TO SPILL AREA. AVOID BREAING FUMES. VENTILATE
AREA.
Handling
Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS, FLAME.
KEEP CLOSED CONTAINER. USE W/ADEQUATE VENT. AVOID PROLONGEOR
REPEATED INHALATION OF MIST OR VAPOR & SKIN.
Other Precautions:KEEP OUT OF REACH CHILDREN. STORE IN ACCORDANCE WITH
NFPA, STATE AND LOCAL REGULATIONS.
Exposure Controls
Ventilation:LOCAL EXHAUST: IF HIGH VAPOR CONCENTRATION IN AIR.
Protective Gloves:OIL RESISTANT
Supplemental Safety and Health
MSDS DATE: 6/26/85
Chemical Properties
Boiling Pt:B.P. Text:310F
Vapor Density:>AIR
Spec Gravity:1.30
Solubility in Water:NONE
Percent Volatiles by Volume:25%
Stability
Stability Indicator/Materials to Avoid:YES
DOESN'T REACT WITH MOST CONSTRUCTION MATERIALS.
Stability Condition to Avoid:HEAT, SPARKS, FLAME, STATIC ELECTRICITY
Hazardous Decomposition Products:CO2, CO
Disposal
Waste Disposal Methods:DISPOSE AT APPROVED DISPOSAL SITE OR BURN IN
ACCORDANCE WITH REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.